They will return to 0% if the temperature is 65 C or less. But this is a very simple and thus limited way of adjusting the fan speed. Then you can set the fan speed according to the slider. Next, you'll need to flick the switch in the middle left of the card. For example, in my curves, the fans will always spin at 100% speed if the temperature is 95 C. To do this, click the button in the top right corner of a fan control card and check the option Manual control. When the minimum or maximum temperature is reached for both of these cards, their corresponding speed will trigger. Next, you need to set a minimum speed and a maximum speed. Basically, you're telling the app, "I want my temperature to never exceed X, but it's okay if it never goes below Y." Both cards require you to set a minimum and a maximum temperature. First, let's focus on the Target and Linear cards since they're very similar to each other. But IF your case fans are of the 3-pin type and IF the headers you plug them into are using only the PWM Mode for controlling them, that will not work. I've already configured these cards to my personal preference. You have specified the CPU cooler fan as a 4-pin (PWM type) unit, and that certainly should have its speed under control of the mobos CPUFAN header. For case fans, you can use the hottest motherboard, CPU, or GPU sensor as it doesn't matter too much. Before you do anything, you need to select a temperature source.įor CPU fans, use one of your CPUrelated sensors (pick the one with the highest temperature to be safe).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |